 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PME271M/E * EMI suppressor, classes X1 and X2, metallized paper * 0.001 - 0.6 F, 275/300 VAC, +110 C * The highest possible safety regarding active and passive flammability. * Self-extinguishing UL 94V-0 encapsulation material. * Excellent self-healing properties. Ensures long life even when subjected to frequent overvoltages. * Good resistance to ionisation due to impregnated dielectric. * High dU/dt capability. * Small dimensions. * Safety approvals for worldwide use. * The capacitors meet the most stringent IEC humidity class, 56 days. * The impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. L B TYPICAL APPLICATIONS The capacitors are intended for use as interference suppressors in X1 or X2 (across-the-line) applications. CONSTRUCTION Multi-layer metallized paper. Encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. H p 0.5 d TECHNICAL DATA PME271M Rated voltage VAC, 50/60Hz Capacitance range F Temperature range C Climatic category IEC Capacitance tolerance Approvals Dissipation factor tan Insulation resistance 275 0.001-0.6 -40/+110 40/110/56/B PME271E 300 0.01-0.22 -40/+110 40/110/56/B 10% for C > 0.1 F, code K. 20% for C 0.1 F, code M S, N, D, FI, VDE, SEV, IMQ, UL, CSA 1.3 % at 1 kHz C 0.33 F 12000 M C > 0.33 F 4000 s Measured at 500 VDC after 60 s, +23C Recommended voltage: 630 VDC Tabulated self-resonance frequencies f0 refer to 5 mm lead lengths. The 100% screening factory test is carried out at 2150 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. l d = 0.6 for p = 10.2 0.8 for p = 15.2, 20.3, 22.5 1.0 for p = 25.4 dB 70 60 50 40 30 20 10 Attenuation 0.47 F 0.047 F 0.0047 F l = standard 30 +5/-0 mm (code R30) option short leads, tolerance +0/-1 mm (standard 6 mm, code R06) Other lead lengths on request. In DC applications Resonance frequency f 0 1 3 5 10 30 100 200 MHz Suppression versus frequency. Typical values. Test voltage between terminals ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6, Test Fc 3 directions at 2 hour each, 10 - 500 Hz at 0.75 mm or 98 m/s2 No visible damage, No open or short circuit Bump Solderability IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s2 IEC 60068-2-20, Test Ta Solder globule method No visible damage, No open or short circuit Wetting time for d 0.8 < 1 s for d > 0.8 < 1.5 s Active flammability EN 132400 Passive flammability IEC 60384-14 (1993), EN 132400 Humidity IEC 60068-2-3, Test Ca +40C and 90 - 95% R.H. 56 days 162 PME271M/E ARTICLE TABLE Quantity per package reel R30 R06 taped Weight pcs pcs pcs g Approvals fO MHz Max dU/dt V/s S N D FI VDE SEV IMQ UL CSA Capaci- Max dimensions tance in mm F B H L Article code p CLASS X2 275 VAC +110 C PME271 M 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.10 0.15 0.22 0.10 0.15 0.22 0.27 0.33 0.27 0.33 0.47 0.60 3.9 3.9 3.9 4.1 5.1 5.2 5.2 5.2 6.0 6.0 6.0 7.8 8.5 7.6 9.0 11.3 8.0 8.0 10.0 12.0 12.0 10.5 12.1 15.3 15.3 7.5 7.5 7.5 8.2 10.5 10.5 10.5 10.5 12.5 12.5 12.5 13.5 14.3 14.0 15.0 16.5 17.0 17.0 19.0 22.0 22.0 17.3 19.0 22.0 22.0 13.5 13.5 13.5 13.5 13.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 10.2 10.2 10.2 10.2 10.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 1000 1000 1000 1000 800 500 500 500 400 400 400 400 300 250 200 150 200 200 150 100 100 100 100 75 75 2000 2000 2000 2000 1600 1000 1000 1000 800 800 800 800 500 1500 1200 1000 1200 1200 1000 800 800 1000 800 600 600 700 700 700 600 600 600 600 600 400 400 400 400 350 250 250 180 250 250 200 0.7 0.7 0.7 0.9 1.2 1.7 1.7 1.7 3.0 3.0 3.0 3.3 3.8 4.0 5.0 7.0 5.5 5.5 7.5 10.0 10.0 8.5 10.0 15.0 15.0 53 44 37 30 24 19 16 13 10 8.4 7.0 5.6 4.3 4.1 3.4 2.7 3.9 3.3 2.6 2.3 2.1 2.4 2.1 1.8 1.6 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 600 600 600 600 600 600 400 400 400 400 400 400 PME271M410MR30 PME271M415MR30 PME271M422MR30 PME271M433MR30 PME271M447MR30 PME271M468MR30 PME271M510MR30 PME271M515MR30 PME271M522MR30 PME271M533MR30 PME271M547MR30 PME271M568MR30 PME271MB6100MR30 PME271M610MR30 PME271M615KR30 PME271M622KR30 PME271MD6100MR30 PME271MD6150KR30 PME271MD6220KR30 PME271MD6270KR30 PME271MD6330KR30 PME271M627KR30 PME271M633KR30 PME271M647KR30 PME271M660KR30 24.0 20.3 24.0 20.3 24.0 20.3 27.0 27.0 27.0 27.0 27.0 30.5 30.5 30.5 30.5 22.5 22.5 22.5 22.5 22.5 25.4 25.4 25.4 25.4 CLASS X1 300 VAC +110 C PME271 E 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.068 0.10 0.15 0.22 0.15 0.22 5.2 5.2 7.3 7.3 8.5 7.6 11.3 8.0 8.0 10.0 12.0 10.6 12.1 10.5 10.5 13.0 13.0 14.3 14.0 16.5 17.0 17.0 19.0 22.0 16.1 19.0 18.5 18.5 19.0 19.0 18.5 15.2 15.2 15.2 15.2 15.2 500 500 400 400 300 250 150 200 200 150 100 150 100 1000 1000 800 800 500 1500 1000 1200 1200 1000 800 1000 800 600 600 400 400 350 250 180 250 250 200 1.7 1.7 3.0 3.0 3.8 4.5 7.0 5.5 5.5 5.5 5.5 8.6 10.0 16 13 9.8 7.0 6.4 5.2 4.1 4.7 4.1 3.2 2.5 3.3 2.6 1200 1200 1200 1200 1200 600 600 600 600 600 600 400 400 PME271E510MR30 PME271E515MR30 PME271E522MR30 PME271E533MR30 PME271E547MR30 PME271E568MR30 PME271E610MR30 PME271ED5680MR30 PME271ED6100MR30 PME271ED6150KR30 PME271ED6220KR30 PME271E615KR30 PME271E622KR30 24.0 20.3 24.0 20.3 27.0 27.0 27.0 27.0 22.5 22.5 22.5 22.5 30.5 25.4 30.5 25.4 163 PME271M/E APPROVALS/REFERENCE DOCUMENTS Certification Body S N D FI VDE SEV Specification EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 Approval reference 9834227-01 (X2), 9821105-01 (X1), P98102279 (X2), P98101874 (X1) 308048 (X2), 307886 (X1), 203301 (X2), 202782 (X1), 118230 (X2), 117365 (X1), 99.7 70053.01 (X2), 99.7 70083.01(X1) V 4699 (X2), V 4698 (X1), E 100117 (X2, X1) E 73869 (X2) 53108 (X2) * * * * * * * MARKING RIFA RIFA article code Rated capacitance Rated voltage X2 or X1 SH, for self-healing Climatic category according to IEC 60068-1, appendix A * Passive flammability class * Approval marks * Manufacturing code (year, month) PACKING Capacitors in standard design (lead length 30 mm) and with L < 24 mm and lead length 5 or 6 mm are packed bulk in a box with dimensions 245 x 145 x 80 mm. Quantity/ package as per article table. Capacitors with L 24 mm and lead length 5 or 6 mm are packed on trays piled in a box with dimensions 300 x 260 x 195 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. IMQ UL EN 132400 UL 1283 (UR = 250 VAC) UL 1414 (UR = 250 VAC) C 22.2 No. 1 (UR = 250 VAC) CSA ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. 164 |
Price & Availability of PME271M547MR30
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |